Rubber Band Change Trick – Rubber Band Tricks

The trick of changing a rubber band from the first and second fingers to the third and fourth, if done quickly, can be performed without detection by any one. The band on the first two fingers is shown to the spectator as in Fig. 1, with the back of the hand up.
The hand is then turned over and the band drawn out quickly, as shown in Fig. 2, in a manner as to give the impression that the band is whole and on the two fingers. While doing this, quickly fold all the fingers so that their ends enter the band, and turn the hand over and let go the band, then show the back with the fingers doubled up. In reality the fingers will be in the band, as in Fig. 3, and the back will still show the band on the first two fingers. Quickly straighten out all the fingers, and the band will snap over the last two fingers, as shown in Fig. 4.

Transferring Rubber Band from the First Two Fingers to the Last Pair, Like Magic (Fig. 1, Fig. 2, Fig. 3, Fig. 4)

—Contributed by E. K. Marshall, Oak Park, Ill.

Excerpt from the book:
THE BOY MECHANIC – BOOK 2
1000 THINGS FOR BOYS TO DO
HOW TO CONSTRUCT DEVICES FOR WINTER SPORTS, MOTION-PICTURE CAMERA, INDOOR GAMES, REED FURNITURE, ELECTRICAL NOVELTIES, BOATS, FISHING RODS, CAMPS AND CAMP APPLIANCES, KITES AND GLIDERS, PUSHMOBILES, ROLLER COASTER, FERRIS WHEEL
AND
HUNDREDS OF OTHER THINGS WHICH DELIGHT EVERY BOY WITH 995 ILLUSTRATIONS
PUBLISHED 1915, BY H. H. WINDSOR CHICAGO
POPULAR MECHANICS CO. PUBLISHERS

Read more

How to Make a Malay Kite – Homemade Kites The Malay tailless kite is probably the most practical kind ever invented. It will fly in a wind that the tail variety could not withstand, and it wil...
Castle project – Art projects for kids 1.You need:2.Draw a castle.3.Cut three sides of the windows and the door. Open them.4.Put your picture on top of the blank sheet of paper. Draw the wi...
How to Make a Water Bike Water bicycles afford fine sport, and, like many another device boys make, can be made of material often cast off by their people as rubbish. The p...
How to Make a Rabbit Trap A good serviceable rabbit trap can be made by sinking a common dry goods box in the ground to within 6 in. of its top. A hole 6 or 7 in. square is cut...
Close Menu